Electricity Saving
How much is your yearly electricity bill? You might as well just burn the money and save time. With our new Electricity Reduction Devices (ERD's) you can save up to 15% on you bill TODAY.
Imagine getting your electricity bill and being able to open it and not get a complete shock. With our proven technology that completely conforms to all European electricity regulations.
There are many different types of electrical equipment which affect the electricity supply in different ways. Some electrical loads have a bad power factor, which results in higher electrical current flowing than is necessary to achieve the end result, irrespective of whether that is heating, lighting, mechanical power, ventilation, etc.
This means more generators and a heavier distribution network is required, the results of which is YOU the user have to pay for it all.
Power Factor can be regarded as a measure of “efficiency
and has values ranging from 0 to 1, where 1 is 100% efficient. The equipment
improves this “efficiency” so that less electrical current is needed to
achieve the same result. A wide variety of products are available to do
this, some of which operate automatically, in order to compensate for varying
electrical loads which are common in today’s manufacturing plants and offices.
Your Electricity Bills
All industrial and commercial electricity users have to pay for the energy
they use. The bills that you receive are based on a number of factors:
KWH Units
Climate Change Levy (CCL)
Maximum Demand
Availability Charge
Reactive Power
You are always charged for the first two, and often pay for one or more of the others – it all depends upon the tariff that you are on.
Companies with high electrical loads often have a reduced power factor.
A low power factor can cause undesirable effects such as increased electricity
costs charged by their supplier.
Case 2
A Radiator manufacturing company in South Yorkshire.
Total loading of 4754kVA at 0.69 PF (on 30+ transformers ) and an authorized supply capacity of 3800kVA. Installed a total of 2,500kVAr in 17 cabinets, improved power factor 0.95
Equipment £25,000 installation £10,000, savings £17,000 per annum
Case 1
A Printing Factory in Banbury
Loading of 832kVA at 0.81 PF, on an 800kVA transformer. Installed a 300kVAr detuned PFC system, to improve the PF to 0.96 and reduce the demand to 702kVA.
Equipment cost approx £8,400, installation approx £3,400, savings of approx £3,450 per annum
Products
Interested in selling Tell Me First Products. Find out about retail opportunities
Click here for more information
Interested in becoming a distributor of Tell Me First products? Find out about distribution opportunities
Click here for more information
